Запчасти Case IH DH-SERIES (008) - PISTONS, RINGS AND SLEEVES - 4" BORE / CONNECTING RODS / CRANKSHAFT (02) - ENGINE
№
Артикул
Название
Примечание
Количество
When new piston rings are required, we recommend installing A8086 set of 2 in 1 chrome piston rings.
1шт.
b4573a
B4573A
X
PISTON - for gasoline or low cost fuel (See B4686A) (See A7493 and 4865AA sleeve sets)
4шт.
When new piston rings are required, we recommend installing A8086 set of 2 in 1 chrome piston rings.
1шт.
b4686a
B4686A
PISTON - high altitude. Can only be used with A157AA cylinder head (See B4573A and 4865AA)
4шт.
When new piston rings are required, we recommend installing A8086 set of 2 in 1 chrome piston rings.
1шт.
3721aa
3721AA
PISTON RING SET
RINGS - set of (16) low cost replacement piston (Consists of 4 - A4648A, 8 - 6024A and 4 - 6025A) See A8086 set of 2 in 1 chrome rings
1шт.
a7493
A7493
SLEEVES - cylinder, set of (4) fitted with pistons, rings, pins and packing (For use with A157AA, A2399AA and 4092AA cylinder heads for gasoline or A157AA and A2873AA heads for low cost fuel) See 4865AA
1шт.
When new piston rings are required, we recommend installing A8086 set of 2 in 1 chrome piston rings.
1шт.
When new piston rings are required, we recommend installing A8086 set of 2 in 1 chrome piston rings.
1шт.
When new piston rings are required, we recommend installing A8086 set of 2 in 1 chrome piston rings.
1шт.
4865aa
4865AA
SLEEVES - cylinder, set of (4) fitted with pistons, rings, pins and packing (For use with A2873AA cylinder head for gasoline) (See A7493)
1шт.
153aa
153AA
X
ROD - connecting, with bolts, nuts and shims (See 3252AA and 3253AA)
4шт.
When connecting rods require rebabbitting, they may be sent to the nearest Case Branch in exchange for a rebabbitted rod, provided old rod is in otherwise good condition.
1шт.
3252aa
3252AA
ROD - connecting, with bolts, nuts and shims (.010" undersize) (See 153AA)
4шт.
When connecting rods require rebabbitting, they may be sent to the nearest Case Branch in exchange for a rebabbitted rod, provided old rod is in otherwise good condition.
1шт.
3253aa
3253AA
ROD - connecting, with bolts, nuts and shims (.020" undersize) (See 153AA)
4шт.
When connecting rods require rebabbitting, they may be sent to the nearest Case Branch in exchange for a rebabbitted rod, provided old rod is in otherwise good condition.
1шт.
4356a
4356A
X
LINER - crankshaft bearing, front, lower. Standard size (Not fitted) (See 6015A)
1шт.
4357a
4357A
X
LINER - crankshaft bearing, front, upper. Standard size (Not fitted) (See 6014A)
1шт.
4358a
4358A
X
LINER - crankshaft bearing, rear, lower. Standard size (Not fitted) (See 6019A)
1шт.
4359a
4359A
X
LINER - crankshaft bearing, rear, upper. Standard size (Not fitted) (See 6018A)
1шт.
4360a
4360A
X
LINER - crankshaft bearing, center, upper. Standard size (Not fitted) (See 6016A)
1шт.
4361a
4361A
X
LINER - crankshaft bearing, center, lower. Standard size (Not fitted) (See 6017A)
1шт.
6014a
6014A
LINER - crankshaft bearing, front, upper, .090" undersize (Not fitted) (See 4357A)
1шт.
6015a
6015A
LINER - crankshaft bearing, front, lower, .090" undersize (Not fitted) (See 4356A)
1шт.
6016a
6016A
LINER - crankshaft bearing, center, upper, .090" undersize (Not fitted) (See 4360A)
1шт.
6017a
6017A
LINER - crankshaft bearing, center, lower, .090" undersize (Not fitted) (See 4361A)
1шт.
6018a
6018A
LINER - crankshaft bearing, rear, upper, .090" undersize (Not fitted) (See 4359A)
1шт.
6019a
6019A
LINER - crankshaft bearing, rear, lower, .090" undersize (Not fitted) (See 4358A)
1шт.
o7920a
O7920A
BALL BEARING
BEARING - pilot, clutch shaft, flywheel end (New Departure no. 7505)
1шт.
o3019ab
O3019AB
GEAR - flywheel ring. Prior to tractor no. 4406069. See O5565AB
1шт.
o5565ab
O5565AB
GEAR, RING
GEAR - flywheel ring. Tractor no. 4406069 and after. See O3019AB
1шт.
Выбрано товаров: 0